Ideal for tea, coffee and hot beverages the Boiling Billy original undersink boiling water unit supplies boiling water via a brass chrome plated tap. These units also have the
option to have a triple action filter fitted and are ideal for use in the office, staff kitchens, canteens and homes.
|
 |
 Four sizes to fit most requirements |
|
1.25L, 2.5L, 5L & 10L Models |
|
Unit is located under the sink saving power and space |
|
Solid Brass rapid action 1/4 turn lever tap |
|
Element controls temperature and boil dry protection |
|
Simple installation and simple to service if required |
|
No expensive pumps, solenoid valves or drainage required |
|
AS 3500 spill try not rquired up to 7 litres |
|
1 year warranty |
|
Click here
to download installation and maintenance instructions |
MODEL |
BOILING CAPACITY
(Litres) |
BOILING CAPACITY
(200ml cups) |
BOILING RECOVERY (CUPS/ HR) |
RATING kW |
HEIGHT mm |
WIDTH mm |
DEPTH mm |
TD1.25 |
1.25 |
10-13 |
90 |
1.8 |
325 |
180 |
150 |
TD2.5 |
2.5 |
15-20 |
110 |
2.4 |
325 |
245 |
290 |
TD5 |
5 |
30-40 |
110 |
2.4 |
480 |
245 |
290 |
TD10 |
10 |
60-70 |
110 |
2.4 |
515 |
325 |
345 |
| Note: A 350kpa pressure limiting valve should be fitted for maximum efficiency in all areas. |
| Extras: A triple action filter can be fitted to all units. |
| How to Specify Required Model: Determine how many cups of boiling water may be required at one time, then specify the corresponding model. If you require a
larger element, place the kW rating after the model number. For stainless steel case place SS. |
|
| 7 Year warranty on storage tank when fitted with a filter |
| 1 Year warranty on tap, ball, valve, and element |
| No Costly Parts |
| Simple and Cheap To Service |
|
|
| Typical Installation - (Click
for Enlargement) |
 |
